Analyse ausstehendCVE-2026-34176

CVE-2026-34176: RCI in F5 BIG-IP

Plattform

linux

Komponente

bigip

Behoben in

21.0.0.2

CVE-2026-34176 describes a remote command injection (RCI) vulnerability discovered in F5 BIG-IP appliances running in Appliance mode. This flaw allows an authenticated attacker to execute arbitrary commands on the system, potentially leading to complete system compromise. The vulnerability affects versions 16.1.0 through 21.0.0.2; versions past their End of Technical Support (EoTS) are not evaluated. A fix is available in version 21.0.0.2.

Auswirkungen und Angriffsszenarienwird übersetzt…

Successful exploitation of CVE-2026-34176 grants an authenticated attacker the ability to execute arbitrary commands on the affected BIG-IP appliance. This could lead to a complete takeover of the system, allowing the attacker to steal sensitive data, modify configurations, or pivot to other systems within the network. The impact is particularly severe given BIG-IP's role as a critical component in many network infrastructures, often handling traffic for essential services. The ability to execute commands provides a broad attack surface, potentially enabling attackers to install malware, create backdoors, or disrupt network operations. The authentication requirement limits the immediate scope, but if an attacker can obtain valid credentials, the consequences are significant.

Ausnutzungskontextwird übersetzt…

CVE-2026-34176 was published on May 13, 2026. Its CVSS score of 8.7 (HIGH) indicates a significant risk. Currently, there are no publicly available proof-of-concept (POC) exploits. The vulnerability is not listed on CISA KEV as of this writing, and there is no indication of active exploitation campaigns. Organizations should prioritize patching to mitigate the potential risk.

Bedrohungsanalyse

Exploit-Status

Proof of ConceptUnbekannt
CISA KEVNO
Internet-ExponierungHoch

CISA SSVC

Ausnutzungnone
Automatisierbarno
Technische Auswirkungtotal

CVSS-Vektor

BEDROHUNGSANALYSE· CVSS 3.1CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:N8.7HIGHAttack VectorNetworkWie der Angreifer das Ziel erreichtAttack ComplexityLowBedingungen zur erfolgreichen AusnutzungPrivileges RequiredHighErforderliche AuthentifizierungsstufeUser InteractionNoneOb ein Opfer eine Aktion ausführen mussScopeChangedAuswirkungen über die Komponente hinausConfidentialityHighRisiko der Offenlegung sensibler DatenIntegrityHighRisiko nicht autorisierter DatenänderungAvailabilityNoneRisiko der Dienstunterbrechungnextguardhq.com · CVSS v3.1 Basis-Score
Was bedeuten diese Metriken?
Attack Vector
Netzwerk — aus der Ferne über das Internet ausnutzbar. Kein physischer oder lokaler Zugriff erforderlich.
Attack Complexity
Niedrig — keine besonderen Bedingungen erforderlich. Zuverlässig ausnutzbar.
Privileges Required
Hoch — Administrator- oder Privilegienkonto erforderlich.
User Interaction
Keine — automatischer und lautloser Angriff. Das Opfer tut nichts.
Scope
Geändert — Angriff kann über die anfällige Komponente hinaus auf andere Systeme übergreifen.
Confidentiality
Hoch — vollständiger Vertraulichkeitsverlust. Angreifer kann alle Daten lesen.
Integrity
Hoch — Angreifer kann beliebige Daten schreiben, ändern oder löschen.
Availability
Keine — kein Verfügbarkeitseinfluss.

Betroffene Software

Komponentebigip
HerstellerF5
Mindestversion16.1.0
Höchstversion21.0.0.2
Behoben in21.0.0.2

Schwachstellen-Klassifikation (CWE)

Zeitleiste

  1. Reserviert
  2. Veröffentlicht

Mitigation und Workaroundswird übersetzt…

The primary mitigation for CVE-2026-34176 is to upgrade to F5 BIG-IP version 21.0.0.2 or later. If upgrading immediately is not feasible, consider implementing temporary workarounds. Restrict access to the vulnerable iControl REST endpoint using network segmentation and access control lists (ACLs). Implement strict authentication and authorization policies to limit the number of users with access to the iControl interface. Monitor iControl REST endpoint traffic for suspicious activity. While a WAF might offer some protection, it is not a substitute for patching. After upgrading, verify the fix by attempting to trigger the command injection vulnerability through the iControl REST endpoint and confirming that the attempt is blocked.

So behebenwird übersetzt…

F5 recomienda aplicar las actualizaciones de seguridad proporcionadas en el aviso de seguridad correspondiente (K000160857).  Estas actualizaciones corrigen la vulnerabilidad de inyección de comandos remotos autenticados.  Consulte la documentación oficial de F5 para obtener instrucciones detalladas sobre cómo aplicar las actualizaciones.

Häufig gestellte Fragenwird übersetzt…

What is CVE-2026-34176 — RCI in F5 BIG-IP?

CVE-2026-34176 is a remote command injection vulnerability in F5 BIG-IP appliances running in Appliance mode, allowing authenticated attackers to execute commands. It has a HIGH severity rating (8.7).

Am I affected by CVE-2026-34176 in F5 BIG-IP?

You are affected if you are running F5 BIG-IP in Appliance mode with versions between 16.1.0 and 21.0.0.2. Versions past their End of Technical Support (EoTS) are not evaluated.

How do I fix CVE-2026-34176 in F5 BIG-IP?

Upgrade to F5 BIG-IP version 21.0.0.2 or later. As a temporary workaround, restrict access to the vulnerable iControl REST endpoint and strengthen authentication.

Is CVE-2026-34176 being actively exploited?

As of now, there are no publicly available proof-of-concept exploits or reports of active exploitation campaigns, but the HIGH severity warrants immediate attention.

Where can I find the official F5 advisory for CVE-2026-34176?

Refer to the official F5 security advisory on their website for detailed information and mitigation guidance: [https://www.f5.com/security/center/advisory/f5-security-advisory-2026-34176](https://www.f5.com/security/center/advisory/f5-security-advisory-2026-34176)

Ist dein Projekt betroffen?

Lade deine Abhängigkeitsdatei hoch und erfahre sofort, ob dich diese und andere CVEs treffen.

liveKostenloser Scan

Jetzt testen — kein Konto

Laden Sie ein Manifest hoch (composer.lock, package-lock.json, WordPress Plugin-Liste…) oder fügen Sie Ihre Komponentenliste ein. Sie erhalten sofort einen Schwachstellenbericht. Das Hochladen einer Datei ist nur der Anfang: Mit einem Konto erhalten Sie kontinuierliche Überwachung, Slack/email-Benachrichtigungen, Multi-Projekt- und White-Label-Berichte.

Manueller ScanSlack/E-Mail-AlertsKontinuierliche ÜberwachungWhite-Label-Berichte

Abhängigkeitsdatei hier ablegen

composer.lock, package-lock.json, requirements.txt, Gemfile.lock, pubspec.lock, Dockerfile...