Analyse ausstehendCVE-2026-40621

CVE-2026-40621: Authentication Bypass in ELECOM WRC-BE72XSD-B

Plattform

linux

Komponente

elecom-wrc-be72xsd-b

CVE-2026-40621 describes a critical authentication bypass vulnerability discovered in the ELECOM WRC-BE72XSD-B Wireless LAN Access Point. This flaw allows attackers to access specific URLs on the device without requiring any authentication credentials. Successful exploitation could lead to unauthorized access to sensitive configuration data and potentially network traffic, impacting confidentiality and integrity. The vulnerability affects versions 1.1.0 through v1.1.1, and a fix is pending from the vendor.

Auswirkungen und Angriffsszenarien

The primary impact of CVE-2026-40621 is the potential for unauthorized access to the ELECOM WRC-BE72XSD-B Wireless LAN Access Point. Because authentication is not required to access certain URLs, an attacker can directly interact with the device's internal interfaces. This could allow them to modify network settings, view user data, or even intercept network traffic passing through the access point. The blast radius extends to all devices connected to the network served by the compromised access point, as an attacker could potentially use the access point as a springboard for further attacks. The lack of authentication makes this vulnerability particularly concerning, as it requires minimal effort to exploit.

Ausnutzungskontext

CVE-2026-40621 was published on May 13, 2026. The vulnerability's severity is rated as CRITICAL (CVSS 9.8) due to the ease of exploitation and potential impact. There is currently no indication of active exploitation campaigns targeting this vulnerability, nor is it listed on KEV or EPSS. Public proof-of-concept (POC) code is not yet available, but the vulnerability's nature suggests it could be easily exploited once a POC is developed.

Bedrohungsanalyse

Exploit-Status

Proof of ConceptUnbekannt
CISA KEVNO
Internet-ExponierungHoch
Berichte1 Bedrohungsbericht

CISA SSVC

Ausnutzungnone
Automatisierbaryes
Technische Auswirkungtotal

CVSS-Vektor

BEDROHUNGSANALYSE· CVSS 3.1CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H9.8CRITICALAttack VectorNetworkWie der Angreifer das Ziel erreichtAttack ComplexityLowBedingungen zur erfolgreichen AusnutzungPrivileges RequiredNoneErforderliche AuthentifizierungsstufeUser InteractionNoneOb ein Opfer eine Aktion ausführen mussScopeUnchangedAuswirkungen über die Komponente hinausConfidentialityHighRisiko der Offenlegung sensibler DatenIntegrityHighRisiko nicht autorisierter DatenänderungAvailabilityHighRisiko der Dienstunterbrechungnextguardhq.com · CVSS v3.1 Basis-Score
Was bedeuten diese Metriken?
Attack Vector
Netzwerk — aus der Ferne über das Internet ausnutzbar. Kein physischer oder lokaler Zugriff erforderlich.
Attack Complexity
Niedrig — keine besonderen Bedingungen erforderlich. Zuverlässig ausnutzbar.
Privileges Required
Keine — ohne Authentifizierung ausnutzbar. Keine Zugangsdaten erforderlich.
User Interaction
Keine — automatischer und lautloser Angriff. Das Opfer tut nichts.
Scope
Unverändert — Auswirkung auf das anfällige Komponente beschränkt.
Confidentiality
Hoch — vollständiger Vertraulichkeitsverlust. Angreifer kann alle Daten lesen.
Integrity
Hoch — Angreifer kann beliebige Daten schreiben, ändern oder löschen.
Availability
Hoch — vollständiger Absturz oder Ressourcenerschöpfung. Totaler Denial of Service.

Betroffene Software

Komponenteelecom-wrc-be72xsd-b
HerstellerELECOM CO.,LTD.
Mindestversion1.1.0
Höchstversionv1.1.1 and earlier

Schwachstellen-Klassifikation (CWE)

Zeitleiste

  1. Reserviert
  2. Veröffentlicht

Mitigation und Workarounds

Due to the lack of a currently available patch, mitigation strategies focus on limiting exposure and reducing the attack surface. First, isolate the affected access point on a separate VLAN or network segment to prevent lateral movement. Second, restrict access to the device’s management interface using firewall rules, allowing only authorized IP addresses to connect. Third, monitor network traffic for unusual activity originating from or destined to the access point. While a firmware update is the ultimate solution, these workarounds can significantly reduce the risk until a patch is released. After implementing these mitigations, verify their effectiveness by attempting to access the vulnerable URLs from an unauthorized network location.

So behebenwird übersetzt…

Actualice el firmware del dispositivo ELECOM WRC-BE72XSD-B a una versión corregida que implemente la autenticación adecuada para el acceso a URLs específicas. Consulte la página de soporte de ELECOM para obtener más información sobre las actualizaciones de firmware disponibles: https://www.elecom.co.jp/news/security/20260512-01/

Häufig gestellte Fragen

What is CVE-2026-40621 — Authentication Bypass in ELECOM WRC-BE72XSD-B?

CVE-2026-40621 is a critical vulnerability allowing attackers to access specific URLs on the ELECOM WRC-BE72XSD-B Wireless LAN Access Point without authentication, potentially compromising network settings and data.

Am I affected by CVE-2026-40621 in ELECOM WRC-BE72XSD-B?

If you are using an ELECOM WRC-BE72XSD-B Wireless LAN Access Point running version 1.1.0–v1.1.1 or earlier, you are potentially affected by this authentication bypass vulnerability.

How do I fix CVE-2026-40621 in ELECOM WRC-BE72XSD-B?

Currently, a patch is not available. Mitigate by isolating the access point, restricting access via firewall rules, and monitoring network traffic until a firmware update is released by ELECOM.

Is CVE-2026-40621 being actively exploited?

There is currently no public information indicating active exploitation campaigns targeting CVE-2026-40621, but the ease of exploitation suggests it could become a target.

Where can I find the official ELECOM advisory for CVE-2026-40621?

Please refer to the ELECOM website for official advisories and updates regarding CVE-2026-40621. Check their security notice section for the latest information.

Ist dein Projekt betroffen?

Lade deine Abhängigkeitsdatei hoch und erfahre sofort, ob dich diese und andere CVEs treffen.

liveKostenloser Scan

Jetzt testen — kein Konto

Laden Sie ein Manifest hoch (composer.lock, package-lock.json, WordPress Plugin-Liste…) oder fügen Sie Ihre Komponentenliste ein. Sie erhalten sofort einen Schwachstellenbericht. Das Hochladen einer Datei ist nur der Anfang: Mit einem Konto erhalten Sie kontinuierliche Überwachung, Slack/email-Benachrichtigungen, Multi-Projekt- und White-Label-Berichte.

Manueller ScanSlack/E-Mail-AlertsKontinuierliche ÜberwachungWhite-Label-Berichte

Abhängigkeitsdatei hier ablegen

composer.lock, package-lock.json, requirements.txt, Gemfile.lock, pubspec.lock, Dockerfile...